EarthYP Edge Conference 2019 in Maui, Hawaii


Seattle, WA 98199
(800) 882-9405

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(800) 367-6201

Add Business Details Free

Send Email
Improve Listing

16905 22nd Ave SW
Seattle, WA 98166
(206) 901-9383

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(206) 542-9494

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(800) 228-9612

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(800) 485-4522

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(888) 884-3889

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(206) 673-3485

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(206) 455-6552

Add Business Details Free

Send Email
Improve Listing


Seattle, WA 98199
(206) 367-0263

Add Business Details Free

Send Email
Improve Listing


Bellevue, WA 98007
(425) 615-6762

Add Business Details Free

Send Email
Improve Listing


Bellevue, WA 98007
(425) 451-8050

Add Business Details Free

Send Email
Improve Listing

17005 190th Ave SE
Renton, WA 98058
(253) 852-6231

Add Business Details Free

Send Email
Improve Listing

16001 Wallingford Ave N
Seattle, WA 98133
(206) 417-0533

Add Business Details Free

Send Email
Improve Listing

938 N 200th St Ste B
Seattle, WA 98133
(206) 542-2791

Add Business Details Free

Send Email
Improve Listing

We offer 11 local business listings for Concrete Breaking Coring Cutting Drilling Sawing Etc in Seattle. Find local Seattle Concrete Breaking Coring Cutting Drilling Sawing Etc in zip codes 98199 and 98166.

People who search for this, may also be interested in: builders & contractors 1 of 2,concrete breaking cutting drilling & sawing,concrete contractors,concrete removal,construction.

Business information provided in part by Neustar Localeze.

Breaking
From Wikipedia, the free encyclopedia
Breaking or breakin' may refer to:
Read Full Article
Concrete
From Wikipedia, the free encyclopedia
Concrete is a composite material composed of fine and coarse aggregate bonded together with a fluid cement (cement paste) that hardens (cures) over time. In the past, limebased cement binders, such as lime putty, were often used but sometimes with other hydraulic cements, such as a calcium aluminate cement or with Portland cement to form Portland cement concrete (named for its visual resemblance to Portland stone). Many other non-cementitious types of concrete exist with other methods of binding aggregate together, including asphalt concrete with a bitumen binder, which is frequently used for road surfaces, and polymer concretes that use polymers as a binder. When aggregate is mixed with dry Portland cement and water, the mixture forms a fluid slurry that is easily poured and molded into shape. The cement reacts with the water and other ingredients to form a hard matrix that binds the materials together into a durable stone-like material that has many uses.
Read Full Article
Coring
From Wikipedia, the free encyclopedia
Coring happens when a heated alloy, such as a Cu-Ni system, cools in non-equilibrium conditions. The center of each grain, which is the first part to freeze, is rich in the high-melting element (e.g., nickel for this Cu–Ni system), whereas the concentration of the low-melting element increases with position from this region to the grain boundary. This is termed a 'cored structure', which gives rise to less than the optimal properties. The distribution of the two elements within the grains is nonuniform, a phenomenon termed 'segregation'; that is, concentration gradients are established across the grains. As a casting having a cored structure is reheated, grain boundary regions will melt first in as much as they are richer in the low-melting component.
Read Full Article
Cutting
From Wikipedia, the free encyclopedia
Cutting is the separation or opening of a physical object, into two or more portions, through the application of an acutely directed force. Implements commonly used for cutting are the knife and saw, or in medicine and science the scalpel and microtome. However, any sufficiently sharp object is capable of cutting if it has a hardness sufficiently larger than the object being cut, and if it is applied with sufficient force. Even liquids can be used to cut things when applied with sufficient force (see water jet cutter). Cutting is a compressive and shearing phenomenon, and occurs only when the total stress generated by the cutting implement exceeds the ultimate strength of the material of the object being cut.
Read Full Article
Drilling
From Wikipedia, the free encyclopedia
Drilling is a cutting process that uses a drill bit to cut a hole of circular cross-section in solid materials. The drill bit is usually a rotary cutting tool, often multi-point. The bit is pressed against the work-piece and rotated at rates from hundreds to thousands of revolutions per minute. This forces the cutting edge against the work-piece, cutting off chips (swarf) from the hole as it is drilled. In rock drilling, the hole is usually not made through a circular cutting motion, though the bit is usually rotated.
Read Full Article
ETC
From Wikipedia, the free encyclopedia
ETC or etc may refer to: Etc. or et cetera, a Latin expression meaning "and the other things" or "and the rest".
Read Full Article
Saw
From Wikipedia, the free encyclopedia
A saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge. It is used to cut through material, very often wood though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less forcefully back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power source. An abrasive saw has a powered circular blade designed to cut through metal or ceramic.
Read Full Article
EarthYP Edge Conference 2019 in Maui, Hawaii